Emergency switching
Switching that cuts the power fast when danger is unfolding, by a control anyone nearby can reach and work at once, such as a stop button on a machine. It's one of the four kinds of switching in BS 7671's Chapter 46. It isn't isolation: stopping something in an emergency doesn't make it safe to work on.
Using Emergency switching in context
Reviewed
A distinction worth remembering
A control switch can stop equipment without isolating every source of energy. Safe isolation includes securing the isolation and confirming the absence of voltage with suitable equipment. A quiz response is preparation for supervised practice, not permission to work on a circuit.
Questions to take further
- How can I revise Emergency switching beyond the definition?
- Explain what Emergency switching describes, compare it with a related term and use it in a topic question. State any assumptions and what evidence you would need before applying the idea to real work.
Sources
- HSE: electrical safety questions — Isolation, competence and precautions before electrical work.
- HSE: GS38 test equipment guidance — Choosing and maintaining suitable low-voltage test equipment.
- IET: current BS 7671 edition and updates — BS 7671:2018+A4:2026 and the main subject areas updated by Amendment 4.
Where Emergency switching fits in the learning path
The The Regs and Practice Papers section covers these units:
- Finding Your Way Round the Regs
- Protection & Selection
- What Amendment 4 Changed
- Timed Practice Papers
Curriculum mapping: C&G 2382-26 (BS 7671:2018+A4:2026).
See this section in the full curriculum
This section is on the Plus path. Lesson availability depends on content review and your learning path.
Read, practise, return
1. Read it in context
- Safe Isolation ProcedureSparks Basics
2. Try recalling, then explore practice
Use the memory prompt below to connect the vocabulary.
- Safe Isolation — quiz previewFree · Sparks Basics
3. Return to the meaning
After reading or practising, explain the idea in your own words, then check what you remembered.
Recall a related term
Which term fits this definition? Say it to yourself, then reveal it. This is a memory prompt, with no score or saved result.
The procedure that proves a circuit dead before anyone works on it. Prove the voltage indicator against a known source, isolate the circuit, secure the isolation with your own lock and tag, prove the point of work dead across all conductor combinations, then prove the indicator again. The final step is the one that catches a tester that died mid-job.
Safe isolation
Read the Safe isolation entryCompare related terms
Open a meaning to compare its role with Emergency switching, or follow its full entry.
Safe isolation
The procedure that proves a circuit dead before anyone works on it. Prove the voltage indicator against a known source, isolate the circuit, secure the isolation with your own lock and tag, prove the point of work dead across all conductor combinations, then prove the indicator again. The final step is the one that catches a tester that died mid-job.
Read the Safe isolation entryIsolation (electrical)
Cutting a circuit or installation off from every source of electrical energy, and securing it, so it's safe to work on. It's one of the four kinds of switching in BS 7671's Chapter 46, and the device has to be one that's suitable for the job. A light switch or stop button doesn't isolate anything. Safe isolation is the wider procedure that also proves the circuit dead.
Read the Isolation (electrical) entryFunctional switching
Everyday on and off control of equipment in normal use, such as a light switch or a thermostat. It's one of the four kinds of switching in BS 7671's Chapter 46. Its job is control rather than safety, so don't treat a functional switch as isolation.
Read the Functional switching entryMotor starter
The unit that starts and stops a motor, usually a contactor with an overload relay. The relay looks for sustained excess current, such as from a jammed machine, and its setting comes from the maker's data. A fuse or circuit breaker upstream deals with fault current and has to ride through the start, so the two are chosen together.
Read the Motor starter entryA definition is a start. Using it in a real question is where it sticks.