Fault protection
Protection that operates when has failed and a live conductor has reached touchable metalwork. In UK practice it usually means : and bonding hold the touch down while the protective device removes the supply within its required time.
Where to look it up: BS 7671 Chapter 41.
Where Fault protection fits in the learning path
The Installation section covers these units:
- Wiring Systems & Enclosures
- Cable Selection & Circuit Design
- Earthing, Bonding & Consumer Units
Curriculum mapping: C&G 2365 Units 203/204/305.
See this section in the full curriculum
This section is on the Plus path. Lesson availability depends on content review and your learning path.
Read, practise, return
1. Read it in context
- Earthing & BondingInstallation
- RCD TypesInstallation
2. Try recalling, then explore practice
Use the memory prompt below to connect the vocabulary.
Follow a topic above to explore how the term is used, then use the learning entry below to find your path.
3. Return to the meaning
After reading or practising, explain the idea in your own words. Revisit the Fault protection definition to check what you remembered.
Recall a related term
Which term fits this definition? Say it to yourself, then reveal it. This is a memory prompt, with no score or saved result.
Protection against touching live parts during normal, fault-free service. It is delivered by insulation around conductors, barriers and enclosures around terminals, and placing live parts out of reach. It is the first layer of shock protection; fault protection is the second, and an installation needs both.
Basic protection
Read the Basic protection entryCompare related terms
Open a meaning to compare its role with Fault protection, or follow its full entry.
Basic protection
Protection against touching live parts during normal, fault-free service. It is delivered by insulation around conductors, barriers and enclosures around terminals, and placing live parts out of reach. It is the first layer of shock protection; fault protection is the second, and an installation needs both.
Read the Basic protection entryADS — Automatic Disconnection of Supply
The standard protective measure in UK installations: earthing, protective bonding and a protective device working together so that a fault to earth causes disconnection within a prescribed time. If any leg fails — poor earth path, missing bond, wrong device — the fault can sit live on touchable metalwork instead of clearing.
Read the ADS entryRCD — Residual Current Device
A safety switch that compares the current going out on the line conductor with the current coming back on the neutral. If they differ, current is leaking somewhere it should not, possibly through a person, and the RCD cuts the supply in a fraction of a second. Most socket circuits in UK homes need RCD protection, usually rated at 30 mA.
Read the RCD entryA definition is a start. Using it in a real question is where it sticks.